Philips HFL3008D Language settings, Menu language, Audio language, Subtitles on analogue channels

3.Skip the search for channels.

4.Connect the USB storage device.

5.Press .

6.Select [Setup] > [Channel settings].

7.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the TV storage device.

8.Disconnect the USB storage device.

Step 3: Copy channels to a TV with pre- installed channels

1.Switch on the second TV, on which you want to copy the channel list.

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.Make sure that the country setting is the same as for the first TV.

5.Press .

6.Press [Cancel] to exit.

7.If the country setting is different, reinstall

the second TV to match the country setting of the first TV. See Change your TV settings > Reset all.

8.Connect the USB storage device to the second TV.

9.Press .

10.Select [Setup] > [Channel settings].

11.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the second TV.

12.Disconnect the USB storage device.

Language settings

Menu language

1.While you watch TV, press .

2.Select [Setup] > [TV settings] > [General

settings] > [Menu language].

3.Select a menu language from the list, then press OK.

EN 28

Audio language

If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language.

1.While you watch TV, press OPTIONS.

2.For digital channels, select [Audio language]. For analogue channels, select [Dual I-II]. Press OK to confirm your selection.

3.Select from the available languages, then press OK.

You can set your preferred primary and secondary audio languages to hear when available.

1.While you watch TV, press .

2.Select [Setup] > [Channel settings] >

[Languages].

3.Select [Primary audio language] or [Secondary audio language] and select from

the available languages. 4. Press OK to confirm.

Subtitles on analogue channels

1.While you watch an analogue TV channel, press TEXT.

2.Enter the three-digit page number of the subtitles page, which is usually '888'.

If available, subtitles are switched on.

Subtitles on digital channels

1.While you watch a digital TV channel, press OPTIONS.

2.Select [Subtitles], then press OK.

3.Select [Subtitles off], [Subtitles on] or [Automatic], then press OK.

Subtitle language

When available, you can change the subtitle language for digital channels.

1.While you watch TV, press OPTIONS.

2.Select [Subtitle language], then select from the available languages and press OK. The subtitle language is changed for the specific channel.

You can set your preferred primary and secondary subtitle languages to display when available.