Philips HQ8290CC Travel lock, Activating the travel lock, Deactivating the travel lock, Charging

12English

HQ8270/HQ8260

-- The remaining battery capacity is indicated by the number of battery level lights that are on (Fig. 12).

Travel lock

You can lock the shaver when you are going to travel.The travel lock prevents the shaver from being switched on by accident.

Note:The travel lock cannot be activated when the shaver is connected to the mains.

Activating the travel lock

1Press the on/off button for 4 seconds to enter the travel lock mode (your display may differ from the one shown in the figure) (Fig. 14).

,, The lock symbol and the power-on symbol in the on/off button flash for a few seconds to indicate that the travel lock has been activated.

Note:When you press the on/off button for less than 4 seconds while the shaver is in the travel lock mode, the lock symbol and the power-on symbol in the on/off button flash for a few seconds.

Deactivating the travel lock

1Press the on/off button for 4 seconds.

,, The lock symbol disappears and the motor starts running to indicate that the travel lock has been deactivated.

The shaver is now ready for use again.

Note:When you start charging, the travel lock is automatically deactivated.

Charging

It takes approx. 60 minutes to fully charge the battery.

When you charge the shaver for the first time or after a long period of disuse, let it charge for 4 hours.

Tip:To optimise the battery capacity, fully charge the shaver and then use it normally until the battery is completely empty. Repeat this process three