Philips HQ8290CC, HQ8270CC, HQ8260CC manual Cleaning the shaving unit under the tap

18English

The cleaning chamber is not dishwasher-proof.

5Fill the cleaning chamber with HQ200 cleaning fluid up to the MAX indication (Fig. 23).

Note: Make sure the cleaning chamber is always filled above the MIN indication.

6Place the Jet Clean System back onto the cleaning

chamber.  (Fig. 24)

Make sure that the release buttons snap back into place.

Cleaning the shaving unit under the tap

1Switch off the shaver and disconnect it from the mains.

2Press the release button to open the shaving unit (Fig. 30).

3Rinse the shaving unit and hair chamber under a hot tap for some

time.  (Fig. 31)

-- Make sure that you clean the inside as well as the outside of the shaving unit (Fig. 32).

Be careful with hot water.Always check if the water is not too hot, to prevent your hands from getting burnt.

4Close the shaving unit and shake off excess water.

Never dry the shaving unit and the hair chamber with a towel or tissue, as this may damage the shaving heads and the coupling spindles.

5Open the shaving unit again and leave it open to let the shaver dry completely.

Cleaning the shaving unit with the brush supplied

1Switch off the shaver and disconnect it from the mains.

2Press the release button to open the shaving unit (Fig. 30).

3Turn the lock anticlockwise (1) and remove the retaining frame (2) (Fig. 33).