Philips HQ8290CC, HQ8270CC, HQ8260CC manual Replacement, Accessories, Environment

20English

Replacement

For maximum shaving performance, we advise you to replace the shaving heads every two years. Replace damaged shaving heads right away.

Only replace the shaving heads with original HQ9 Philips Shaving Heads.

1Switch off the shaver. Disconnect the shaver from the mains or remove it from the Jet Clean System.

2Press the release button to open the shaving unit (Fig. 30).

3Turn the lock anticlockwise (1) and remove the retaining frame (2) (Fig. 33).

4Remove the shaving heads and place new ones in the shaving unit.

Make sure that the projections of the shaving heads fit exactly into the recesses.

5Put the retaining frame back into the shaving unit and turn the lock clockwise.

6Close the shaving unit.

Note: If the shaving unit does not close smoothly, check if you have positioned the shaving heads properly and if the retaining frame is locked.

Accessories

The following accessories are available: -- HQ8500 adapter

-- HQ9 Philips Shaving heads

-- HQ110 Philips Shaving Head Cleaning Spray (not available in some countries)

-- HQ200 Philips Cleaning Fluid -- HQ8010 car cord.

Environment

-- Do not throw away the shaver and the Jet Clean System with the normal household waste at the end of their life, but hand them in at