Philips HQ8270CC Cleaning the trimmer with the brush supplied, Close the trimmer ‘click’, Storage

English 19

4Clean the shaving heads with the brush supplied. Each shaving head consists of a cutter and a guard (Fig. 34).

Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

5Put the shaving heads back into the shaving unit.

6Put the retaining frame back into the shaving unit and turn the lock clockwise.

7Close the shaving unit.

Note: If the shaving unit does not close smoothly, check if you have positioned the shaving heads properly and if the retaining frame is locked.

Cleaning the trimmer with the brush supplied

Clean the trimmer every time you have used it.

1Switch off the shaver and disconnect it from the mains.

2Push the trimmer slide downwards to open the trimmer (Fig. 19).

3Clean the trimmer with the short-bristled side of the cleaning brush. Brush up and down along the trimmer teeth.  (Fig. 35)

4Close the trimmer (‘click’).

Tip: For optimal trimming performance, lubricate the trimmer teeth with a drop of sewing machine oil every six months (Fig. 36).

Storage

There are three ways to store the shaver or to take it with you when you travel:

-- put the shaver in the Jet Clean System. Make sure the protection cap is not on the shaving unit.

Note: If you do not want the shaver to charge while it is stored it in the Jet Clean System, just leave the lever in the upright position

-- put the protection cap on the shaver to prevent damage (Fig. 37). -- store the appliance in the pouch supplied.