Philips HQ8270CC, HQ8290CC, HQ8260CC manual English, Compliance with standards, General, Overview

English 9

-- Never use water hotter than 80°C to rinse the shaver. -- Do not use the shaver in the bath or in the shower.

-- Only use the adapter supplied.

-- Never immerse the Jet Clean System in water nor rinse it under the tap.  (Fig. 3)

-- If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard.

-- Only use the Jet Clean System with the original HQ200 cleaning fluid. -- Use and store the Jet Clean System at a temperature between 10°C

and 35°C.

-- Always place the Jet Clean System on a stable, level and horizontal surface to prevent leakage.

-- Always place the Jet Clean System on a fluid-resistant surface.

-- The Jet Clean System thoroughly cleans but does not disinfect your shaver, therefore do not share the shaver with others.

Compliance with standards

-- The shaver complies with the internationally approved IEC safety regulations and can be safely cleaned under the tap (Fig. 4).

-- The shaver and the Jet Clean System comply with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliances are safe to use based on scientific evidence available today.

General

-- The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts.

-- Noise level: Lc = 64 dB [A]

Overview (Fig. 5)

AProtection cap B Shaving unit

C Shaving unit release button

D Shaver on/off button with power-on symbol E Display

F Trimmer

G Storage pouch