Philips LC5141 manual Installation, Connecting to video equipment, COMPONENT VIDEO SIGNAL YCbCr

7. Installation Connecting to video equipment

COMPONENT VIDEO SIGNAL (YCbCr)

(4)

(3)

(optional)

#

%

Audio in Mouse Data / YCbCr S-Video in Video in

1.To use YCbCr component video input, set ‘SOURCE CHANGE’ under ‘COLOR’ in the Advanced menu to ‘YCbCr’ (See page 20).

2.Connect the Y (green), Cb (blue) and Cr (red) connectors of a DVD player or other component video equipment to the corresponding Data/YCbCr connector % of the projector. For this, use a YCbCr Component cable (optional).

3.To use the built-in audio system, connect one end of the computer audio cable (3) to the Audio in terminal # on the projector. Connect the other end (4) to the Audio output terminal on the video source.

14