9. Maintenance
Caution!
–Do not use a lamp cartridge other than the Philips replacement lamp cartridge. Order this from your Philips dealer using the unit model number (see ‘Note’ under ‘Lamp’).
–Be very careful. The lamp and lampholder may still be too hot to touch.
–Do not loosen any screws except for those mentioned in the instructions below. There is danger of electric shock.
–Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening at anyone.
–A
Resetting the lamplife time
The rated lamp life is about 1000 hours. The rated lamp life is the average life of the lamps produced and tested (under the test conditions of our company) for a long term, however, it may become shorter depending on the conditions of usage. After the lamp has been operating for 1000 hours or longer, the Status indicator on the control panel will light and the ‘LAMP USAGE’ icon which shows hours of total lamp usage will be displayed on the screen. When this happens, turn off the unit and replace the lamp cartridge with a new one. The unit will not turn on after 1100 hours. (It will go off if it is in use.)
1.Press Menu.
–The menu bar appears on the screen.
2.Use cursor control to select INFORMATION in the menu bar.
3.Use cursor control to select LAMP COUNTER in the sub menu.
4.Press OK for 3 seconds to reset the lamp counter.
5.If required, select another item you wish to adjust or press Menu to exit.
23
