English
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.
Problem
No power.
No picture.
Distorted or poor picture.
Completely distorted picture or black/ white picture.
The aspect ratio of the screen cannot be changed even though you have set theTV shape.
No sound or distorted sound.
Solution
✔Check if the AC power cord is properly connected.
✔Press STANDBY ONB on the DVD System or Source buttons on the remote to turn on the power.
✔Check if the TV is switched on.
✔Check the video connection.
✔Set your TV to the correct Video In channel. This channel is usually near channel 00. Or, you may have a button on the TV remote control that selects Auxiliary or A/V IN channel. See your TV owner’s manual for details. Or, change channels at the TV until you see DVD screen on the TV.
✔Sometimes a small amount of picture distortion may appear.This is not a malfunction.
✔Clean the disc.
✔TV has a colour system standard. If the disc’s or DVD system’s colour system is different than your TV’s colour system, the picture may be distorted or colourless.
✔The aspect ratio is fixed on the DVD disc.
✔Depending on the TV, it may not be possible to change the aspect ratio.
✔Adjust the volume.
✔Check that the speakers are connected correctly.
✔Replace the speaker cables.
✔The system is in pause, slow motion or fast forward/reverse mode, press ÉÅ (or ÉÅ on the remote) to resume normal play mode.
20
