5
English
Connections

Step 1: Connecting TV set

IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– Connect the system directly to the
TV set.
Using Video In jack (CVBS)
•Use the supplied composite video cable (yellow)
to connect the system’s COMPOSITE VIDEO
jack to the video input jack (or labeled as A/V In,
Video In, Composite or Baseband) on the TV set.
•To listen to disc playback of the system through
the TV, use the audio cables (white/red) to
connect LINE OUT (L/R) jacks to the
corresponding AUDIO IN jacks on the TV set.
Using an accessory RF modulator
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
•Use the supplied composite cable (yellow) to
connect the system’s COMPOSITE VIDEO jack
to the video input jack on the RF modulator.
•Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s RF jack.
0&'BB,)8BYBSGI 
0&'BB,)8BYBSGI ���
0&'BB,)8BSGI 
0&'BB,)8BB&&5SGI 