Convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

[Off] – Turn off CD-upsampling.

[88.2kHz (X2)] – Convert the sampling rate of the CDs twice as high as the original rate.

Note

CD upsampling is only available in stereo mode.

[Audio Sync]

When you play a video disc, set the default delay time for audio output.

1)To start, press OK.

2)Select a speaker delay in the menu, then press / to set the delay time.

3)Press OK to confi rm and exit.

Video setup

1Press SYSTEM MENU.

» [General Setup] menu is displayed.

2Press to select [Video Setup], then press .

3Select an option, then press OK

4Select a setting, then press OK.

To return to the previous menu, press .

To exit the menu, press SYSTEM MENU.

Note

See the explanations of the above options in the following pages.

[TV Type]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

[PAL] – For TV with PAL color system.

[NTSC] – For TV with NTSC color

 

 

system.

English

with both PAL and NTSC.

[Multi] – For TV that is compatible

 

[TV Display]

The TV format determines the aspect ratio of display according to the type of TV you have connected.

4:3 Pan Scan (PS)

4:3 Letter Box (LB)

16:9 (Wide Screen)

[4:3 Pan Scan] – For 4:3 screen TV: full-height display with the trimmed sides.

[4:3 Letter Box] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen.

[16:9 Wide Screen] – For wide- screen TV: display ratio 16:9.

[Progressive]

If the TV supports progressive scan output, you can turn on the progressive scan mode to enhance the picture quality. Video connection through Component Video is required.

[Off] – Disable progressive scan mode.

[On] – Turn on progressive scan mode.

Tip

There is more detailed description available (see ‘Get started’ > ‘Turn on Progressive Scan’).

[Picture Settings]

Select a predefi ned set of picture color settings or customize your personal setting.

[Standard] – original color setting.

[Bright] – vibrant color setting.

[Soft] – warm color setting.

[Personal] – customize the color setting. Adjust the level of brightness, contrast, sharpness/tint and color saturation.

EN 25

Page 24
Image 24
Philips MCD802/98 user manual Video setup, TV Type, With both PAL and Ntsc, Progressive, Picture Settings