Prepare, Install remote control batteries | Philips MCI300/12, MCI300/05

3 Prepare

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

1 Open the battery compartment.

2 Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3 Close the battery compartment.

Caution

•Risk of product damage! Place the MCi300 on a surface that is level, flat, and strong enough to support the

MCi300.

Warning

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the MCi300.

1 Connect the MCi300 to the power supply

Prepare English

»Your MCi300 turns on and is ready to be set up for use.

Note

•The type plate information is located at the back or at the underside of the MCi300.

You can select from the following status options:

•On

•Standby

• Active standby.The button on the remote control can turn on the MCi300.

•Eco standby

• Passive standby. Only the button on the top panel can turn on the MCi300.

Note

•If no buttons are pressed for 20 minutes, the MCi300 switches to standby.

1	To turn on the MCi300, press .
2	To switch the MCi300 to standby, press .
3	To switch the MCi300 to eco standby,

press and hold the button on the top panel.