Wait until the language selection menu pops up, to select your language.

Note

When the MCi300 is in eco standby mode, the remote control is inactive.

First-time installation

When you connect the MCi300 to the power supply for the first time:

1

2 Press or , then to select the language.

»The MCi300 prompts you to select the network settings.

3 To select the network settings, follow the steps on how to Connect to a home network. (see ‘Connect to a home network’ on page 11)

To stop the network setup, press .

To return to the Home menu, press HOME.

Tip

After the first-time language set-up, you can change the language in the Settings menu.

10EN

Page 11
Image 11
Philips MCI300/05, MCI300/12 user manual First-time installation, Tip