Connect an S-Video cable (not supplied) to the S-VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s S-VIDEO In jack.

MDV450 25/09/2002 9:46 AM Page 11

Hookups (cont’d) 11

Connecting to a TV Only

TV has an S-Video In Jack

2

 

Back of TV

 

(example only)

 

RIGHT AUDIO IN

3

 

LEFT AUDIO IN

1

 

S-VIDEO IN

1

2 Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors.

3 Plug the power cords of the DVD Player and the TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.

4 Turn on the TV power. Set the TV to the correct S-Video In channel. See your TV owner’s manual for details. Or, change channels at the TV until you see the DVD screen saver on the TV.

Helpful Hints

On the TV, the S-Video In jack may be labeled Y/C, S-Video, or S-VHS (super video).

If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.

Set VIDEO OUTPUT to S- VIDEO. Details are on page 34.

Page 11
Image 11
Philips MDV450 owner manual Connecting to a TV Only TV has an S-Video In Jack