Still Picture/Frame-by-Frame Playback,Time Search 21
Still Picture/Frame-by-Frame Playback
1To pause a DVD or Video CD picture,press PAUSE 88on
the remote control during playback.
2Press PAUSE 88repeatedly to advance the still picture one
frame at a time.
3Press PLAY 33to resume regular playback.
DVD VIDEO CD
1,2
3
Time Search
1Press the DISPLAY button during playback.Current playback
information will appear at the top of the screen.
DVD example
2Press 22repeatedly to select the counter numbers beside
TC.This shows the amount of time that the Disc or Track has been
playing,or the elapsed playing time.
3Press the Number buttons to enter the elapsed playing time
at which you want to resume playback,then press OK.
Enter the elapsed playing time in hours,minutes, and seconds.
For example,if the current DVD is a two-hour movie and you want
to jump to the middle of the movie,press 0,1,0,0,0,0, then press OK.
The movie will resume playing at an hour into the movie.
4Press DISPLAY to remove the information from the top of
the screen.
DVD VIDEO CD AUDIO CD
T: 1 / 3 C: 12 / 30
TC: 00:37:58 3D OFF
T: 1 / 3 C: 12 / 30
TC: 00:37:58 3D OFF
31,
4
2
3
• When you press DISPLAY,the counter will appear in
the Information box at the top of the screen.TC
usually appears beside the counter.You can change
the counter type by pressing 1or 2to choose TC,
then pressing 3or 4to choose CC,CR,TC ,DC, DR,
or TR.The counter will change to represent:
CC - elapsed playing time of current Chapter;
CR - remaining playing time of current Chapter;
TC - elapsed playing time of current Title or Track;
TR - remaining playing time of current Title or Track;
DC - elapsed playing time of current Disc;or
DR - remaining playing time of current Disc.
The counters will be available according to the type of
Disc in the DVD Player.
Helpful Hint
MDV450 25/09/2002 9:46 AM Page 21