Philips MDV450 Helpful Hints contd, An Audio CD will not play, DVD Player does not work

MDV450 25/09/2002 9:46 AM Page 43

Helpful Hints (cont'd) 43

An Audio CD will not play.

•Some Audio CDs available on the market are copy protected.These discs will not play on this DVD Player. See your retailer for options regarding non-protected Audio CDs.

The DVD logo does not appear on the TV screen after you remove a Disc.

•Reset the DVD Player by switching it off, then on again.

The DVD Player does not respond to the remote control.

• Aim the remote control directly at the front of the DVD Player (not the TV).

•Remove any obstacles between the DVD Player and the remote control.

•Inspect or replace the batteries in the remote control. Details are on page 8.

The DVD Player will not select some features, such as Angles, Subtitles, or multi-language Audio.

• The feature may not be available on the Disc. If it is not, the will appear on the TV screen. Check the Disc case to see if the Disc has the feature. If the Disc does not have the feature, the DVD Player cannot create the feature.This is not a malfunction of the DVD Player.

The DVD Player does not work.

•Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate the Player again as usual.

Strange codes appear on the Player’s display.

•Remove and reinsert the Disc.

•Clean the Disc.

•Disconnect the power cord from the power outlet for a few minutes, then reconnect the cord and try playback as usual.