Philips MDV450 owner manual Back of TV Example only

Turn on the Stereo power and set your Stereo to the correct Audio In channel or sound source. Refer to the Stereo owner’s manual for details.

LEFT AUDIO IN

Connect the supplied video cable to the yellow VIDEO (VIDEO OUT) jack of the DVD Player and to the TV’s VIDEO IN jack.

RIGHT AUDIO IN

MDV450 25/09/2002 9:46 AM Page 13

Hookups (cont’d) 13

Connecting to a TV and a two-channel Stereo

(Stereo has Dolby Pro Logic or right/left Audio In jacks)

2 Stereo (example only)

Back of TV

(example only)

3

VIDEO IN

1

1

2 Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD Player and to the left/right AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors.

3 Plug the power cords of the DVD Player, Stereo, and the TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.

4

5 Turn on the TV power. Set the TV to the correct Video In channel. See your TV owner’s manual for details. Or, change channels at the TV until you see the DVD screen saver on the TV.

Helpful Hint

• If you prefer or need to use the S-VIDEO or Y CB CR jacks instead, see pages 11-12.You only need one video connection between the TV and the DVD Player.