Panasonic PT-AE300U, PT-AE200U Setting-up, Example of connecting to computer, Projection methods

Example of connecting to computer

ComputerComputer

To audio	To DVI-D	To audio	To RGB
output	output	output	output

* This illustration is an example of connection for the PT-AE300U.

NOTE:

BIt is better to shut down the computer before turning off the MAIN POWER switch of the projector.

BRefer to the list of compatible signals on page 61 for the types of RGB signals which can be input to the projector by connecting a computer.

BOnly one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs.

BThe PT-AE200U does not have a DVI-D input (DVI-D IN) connector.

20-ENGLISH

Setting-up

Projection methods	Preparation
The projector can be set up so that any one of the following four projection

methods can be used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 40 for details.)

DESK/CEILING
DESK	CEILING
FRONT
(Factory default setting)
FRONT/REAR
REAR

NOTE:

BYou will need to purchase the separate ceiling bracket (ET-PKE300) when using the ceiling installation method.

Projector position

The projection range of this projector is 1.2 m – 7.4 m.

The lower edge of the projected image falls about 0.1 m from the center of the lens.

For details about projected image distances, refer to page 65.

Projection Distance

Screen Size	Diagonal length	40˝	60˝	80˝	100˝ 150˝ 200˝
(16:9)	Height	0.5 m	0.8 m	1.0 m	1.3 m	1.9 m	2.5 m
Projection		(1´7˝)	(2´7˝)	(3´3˝)	(4´3˝)	(6´2˝)	(8´2˝)
	Width	0.9 m	1.3 m	1.8 m	2.2 m	3.3 m	4.4 m
Distance
		(2´11˝)	(4´3˝)	(5´10˝)	(7´2˝)	(10´9˝)	(14´5˝)
Minimum Distance		1.2 m	1.9 m	2.5 m	3.1 m	4.7 m	6.2 m
		(3´11˝)	(6´2˝)	(8´2˝)	(10´2˝)	(15´5˝)	(20´4˝)
Maximum Distance		1.4 m	2.2 m	2.9 m	3.7 m	5.6 m	7.4 m
		(4´7˝)	(7´2˝)	(9´6˝)	(12´1˝)	(18´4˝)	(24´3˝)
						ENGLISH-21