<Projector control panel and remote control unit>
' | ( | ) |
|
|
| / |
|
|
|
|
|
| |
|
| & | POWER |
|
|
|
|
|
|
| LIGHT |
| |
|
|
|
| INPUT |
| * |
|
|
| VIDEO | CMPN T | PC | |
|
| ' |
| COMPONENT | KEYSTONE | + |
|
| MENU |
| |||
# |
| ( |
|
|
|
|
| ) |
| ENTER |
| 0 | |
|
|
|
|
| ||
|
| , | NORMAL |
| FREEZE | 1 |
|
|
|
| |||
|
| - |
| MODE | MEMORY | 2 |
$ |
| ASPECT | PICTURE | USER | ||
| . | MUTE | VOLUME |
| ||
|
|
|
| SD |
| 3 |
% |
|
| SD | MENU | TIME |
|
|
|
|
|
|
| |
& |
| * | LCD PROJECTOR |
| ||
+ | 456 |
|
BThe remote control unit and the projector itself have the same control buttons available.
+KEYSTONE buttons (pages 28 and 29)
This button is used to correct keystone distortion of the projected image when the projector position is tilted upward or downward.
,NORMAL button (page 27)
This button is used to reset the projector adjustment values to the factory default settings.
-ASPECT button (page 30)
This button is used for aspect adjustment (vertical and horizontal proportions).
.MUTE button |
(page 33) |
4SD button (page 43)
This button is to select the SD CARD screen.
5SD MENU button (page 43)
This button can be used to return to a previous screen when SD CARD screen is selected.
6SD TIME button (page 49)
This button is used to display or clear the playing time when a moving picture stored on the SD card is played back.
Preparation
#TEMP indicator (page 51)
This indicator illuminates if an abnormally high temperature is detected inside the projector. If the temperature rises above a certain level, the power supply will be turned off automatically and the indicator will illuminate or flash.
$LAMP indicator (page 52)
This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit abnormality is detected.
%Power indicator (pages 22 and 23)
This indicator illuminates red when the main power is switched on (Standby Mode), and it illuminates green when projection of an image begins.
&POWER button (pages 22 and 23)
'MENU button (page 24)
This button is used to display menu screens. When a menu screen is being displayed, it can be used to return to a previous screen or to clear the screen.
(Arrow (F, G, I and H) buttons
(page 26)
These buttons are used to select and adjust items in the
)ENTER button (page 26)
This button is used to accept and to activate items selected in the
*Input select button
(INPUT/VIDEO/COMPONENT/ PC button) (page 22)
This button momentarily stops |
output of the projector’s |
speaker. |
/LIGHT button
This button is used to illuminate the buttons on the remote control unit.
0FREEZE button (page 36)
This button is used to momentarily freeze projection so that a still picture is displayed.
1MODE PICTURE button (page 32)
This button is to display the PICTURE MODE menu.
2MEMORY USER button (page 36)
This button is to display the MEMORY LOAD menu.
3VOLUME +/- buttons
These buttons are used to adjust the volume of the sound output from the projector’s
