9. ADDITIONAL INFORMATION
Maintenance
CAUTION!
–To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
–Before or after replacing the lamp, be sure to clean the air filters. See page 25 for cleaning the air filters.
Resetting the lamp timer
1.Connect the power cord.
–Plug the power cord into the AC socket of the projector.
2. While pressing 4, 2 and OK on the projector, press Power ON on the projector.
–‘Lamp 0000H’ is displayed, indicating that the lamp timer is reset.
with a Kensington Micro Saver Security System. Refer to the | English |
KENSINGTON LOCK
This projector has a Kensington Security Standard slot for use
information that came with the system for instructions on how to use it to secure the projector.
Kensington |
| |
Security | ) | |
Standard connector | ||
|
27
