4. PROJECTOR FEATURES
1.ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS
Compatible with up to 130 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of
2.FOR USE WITH DTV*
Allows projection of DTV images and 16:9
3.BNC TERMINALS FOR COMPONENT AND RGB INPUT Equipped with BNC terminals for connection to a DTV decoder, DVD player and similar video systems for higher quality images. An RCA adapter can also be used with the BNC terminals. (Page 12)
4.
Provides high quality images with minimal dot crawl and cross colour noise.
5.POWER ZOOM AND FOCUS FUNCTION
Features a 130% power zoom function that allows you to easily adjust the screen size with the remote control. Use these functions when adjusting the projection distance to achieve a 102 to 762 cm (40 to 300 inches) screen size.
(Page 9)
6.DIGITAL KEYSTONE CORRECTION
Digitally adjusts an image that is projected at an angle while maintaining image quality and brightness. (Page 9)
7.
A
8.USER-FRIENDLY DESIGN
The
9.AUTO SYNC TECHNOLOGY FOR AUTOMATIC IMAGE PERFECTION
Automatically makes any necessary adjustments for perfectly synced computer images. (Page 17)
10.INTELLIGENT COMPRESSION AND EXPANSION
By using intelligent resizing technology, this projector can display higher and lower resolution images in detail without compromising quality.
11.XGA RESOLUTION FOR HIGH RESOLUTION PRESENTATIONS
With XGA (1,024 x 768) resolution, this projector can display very detailed presentation information.
12.UXGA COMPATIBLE
UXGA (1,600 x 1,200) resolution images are intelligently resized to 1,024 x 768 for
*DTV is the umbrella term used to describe the new digital television system in the united states.
CAUTIONS CONCERNING THE SETUP OF THE PROJECTOR
For minimal servicing and to maintain high image quality, PHILIPS recommends that this projector be installed in an area free from humidity, dust and cigarettesmoke. If the projector is used in these environments, the lens and filter will need to be cleaned (or the filter replaced) more often, and internal cleaning may become necessary. As long as the projector is regularly cleaned,use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Philips Authorised LCD Projector Dealer or Service Centre.
104
F ('40 C)
41
F ('5 C)
NOTES ON OPERATION
•The exhaust vent,the lamp cage cover and adjacent areas may be extremely hot during projector operation. To prevent injury, do not touch these areas until they have sufficiently cooled.
•Allow at least 10 cm (4 inches) of space between the cooling fan (exhaust vent) and the nearest wall or obstruction.
•If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector power cord from the wall outlet and wait at least 10 minutes. Then turn on the power by plugging the power cord back in. This will return the projector to the normal operating condition.
TEMPERATURE MONITOR FUNCTION
If the projector starts to overheat due to setup problems or a dirty air filter,“TEMP.” and “ ” will flash in the
English
Note:
The cooling fan regulates the internal temperature,and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed.
5
