14English
QuestionAnswer
Why does the parent unit pick up signals from another baby monitor?
Why doesn’t the baby monitor manage the specified range of 200 metres/600 feet?
What happens when there is a mains failure?
Why does the rechargeable battery pack of the parent unit not recharge?
The operating time of the parent unit is supposed to be at least 10 hours. Why is the operating time of my parent unit shorter?
Why does the charging light on the parent unit charger light up red continuously even when the battery pack is fully charged?
The baby unit may be out of range of the parent unit or there may be too many walls and/or ceilings between the two units.Try a different location or reduce the distance between the two units.
The
The baby monitor operates on the same channel as another baby monitor in the neighbourhood. Set both units to a different channel with the channel selector.
The specified range of 200 metres/600 feet is only valid in open air. Inside the house, the range is limited by the number and type of walls and/or ceilings between the two units. Change the position of one or both units to optimise the range.
If you use the baby unit without
The rechargeable battery pack has reached the end of its life. Replace the battery pack of the parent unit.
When the rechargeable battery pack of the parent unit has been charged for the first time, the operating time is less than 10 hours.The rechargeable battery pack only reaches its full capacity after you have charged and discharged it at least three times.
The volume of the parent unit may be set too high, which causes the parent unit to consume a lot of energy. Decrease the volume of the parent unit.
The microphone sensitivity level of the baby unit may be set too high, which causes the parent unit to consume a lot of energy. Decrease the microphone sensitivity level on the baby unit.
The charging light always lights up red as soon as the parent unit is placed in the