Philips SGC2910 Button Descriptions

Use to switch between digital and analog. Digital mode is the default mode. In digital mode, the left analog stick

digital controls the X and Y axis. The right analog stick emulates the 1, 2, 3, and 4 action buttons. In the analog

mode, the Digital directional pad functions as a point of view hat while the left analog stick controls the X and

Y axis. The right analog stick controls the Rz and Z axis. The LED light nearest to the Analog button will be

illuminated when Analog mode is on.

Note: The D-pad functions as a point of view control for most software titles, but may operate differently

depending on the design of each individual game.

The turbo feature of the SGC2910 Wireless PC Controller allows the user to set various keys as a turbo re

(Auto Fire) “repeating mode”. This means that user can then hold down the button of his/her choice and the

action will be repeated (without having to hit the button numerous times). This is especially useful in games that

require weapons to be red over and over again.

Press and hold the desired re button then press the turbo button one time (LED Illuminates and Flash). You

now have turbo re. Repeat and you will remove turbo re. When turbo re is used, the LED within the turbo

button will ash. Turbo re can be assigned to buttons 1,2,3,4,5,6,7,8, 11,12, Select and Start.

Note: Turbo re will also work with your custom proles. In this instance the turbo re will repeat the

keyboard key that was programmed to the SGC2910 Wireless PC Controller button.

The F.Connect button is used to force link the SGC2910 controller and docking receiver. The F.Connect button

is found on the SGC2910 Wireless PC Controller and docking receiver marked with PHILIPS logo. By pressing

the F.Connect button on SGC2910 Wireless PC Controller and the docking receiver, you can force these two

devices to connect. This feature is used when multiple SGC2910 Wireless PC Controllers are used in the same

location.

The SGC2910 Wireless PC Controller will enter sleep mode after 1 minutes without any activity. This mode

will conserve battery life. Press the Select, Start, Button 11, or Button 12 to wake up the SGC2910 Wireless PC

Controller.

The SGC2910 Wireless PC Controller has two internal motors. Their weights are unbalanced to provide

vibration when it is activated by game software.

Note: The vibration feedback will only function with software titles that support vibration. You must install

the SGC2910 Wireless PC Controller software. There are many different force feedback and rumble effects

available, however due to differences in software and hardware design, the SGC2910 Wireless PC Controller

may not support all effects. You will nd that the range of effects that the SGC2910 Wireless PC Controller

supports will vary from game to game.

Button Descriptions