Philips VR810BPH owner manual Recording, Press the VCR button, Appear on the display panel

30 Recording

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (details are on page 5) in the VCR. The power will come on.

3

Press the VCR button.

4

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

5

Press the ALT/SPEED button until the desired tape speed appears on the screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 41 and 77.

6

Use the CH(annel) 8/9 button or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel. If no tape is in the VCR, NO CASSETTE will appear on the screen briefly.

8

To pause the recording (for example, during commer- cials), press the STILL/SLOW button. The \MM light will

appear on the display panel.

To resume recording, press the STILL/SLOW button again. The \ light will appear on the display panel.

9

Press the STOP 9 button to stop recording. The \ light will disappear from the display panel.

10

Press the STOP/ EJECT button on the front of the VCR to remove the tape.

1 Turn on the TV.

2 Insert a tape.

	SAT/						3
	CBL/DBS		TV			VCR
4	VCR/TV		POWER		SMARTPICTURE
	QUICK PROGRAMMING
	1— +* + 2 ABC + 3 DEF
	START		STOP		DATE		6
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC		DAILY		WEEKLY
5	7PQRS		8 TUV		9WXYZ
	SPEED		DBS/SAT
	ALT		0		CLEAR
			STILL/SLOW
	-				..........	+
8	REW					FF
			PLAY
9			STOP
	VOL		OK/STATUS			CH
			MENU
			TIMER
	TURBO	AUDIO/		SKIP		TAPE

TIMER MUTE SEARCH MANAGER

JOG/SHTL	REC /OTR	7
REV	FWD

Helpful Hints

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear on the screen briefly. The VCR will eject the tape.

•The VCR records in a preset volume.

•If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 76.

•DSPC may appear briefly on the dis- play panel when you start a recording. Details are on page 60.

•Tape Manager information may appear when you eject the tape after recording. Details are on pages 64-73.