Philips VR810BPH owner manual VHS ET VR1010BP only

32 S-VHS ET (VR1010BP only)

The VR1010BP allows recording in Super VHS ET (Expansion Technology). You can play back those cassettes recorded in S- VHS ET on a VCR equipped with S-VHS ET. You can record with S-VHS picture quality on VHS cassettes.

1

Before you begin the recording, press the S-VHS ET but- ton on the front of the VCR so that the button lights. When the button is lit, recordings will be in S-VHS format.

1,3 2

VR 1010 4 HEAD HI-FI STEREO

VIDEO CASSETTE RECORDER

POWER

S-VHS ET VCR/TV

OPEN A/V FRONT CONNECTORS

				STOP/EJECT
	SUPER VHS ET
CRYSTAL CLEAR VIDEO		TAPE MANAGER	TURBO TIMER
MENU
AUDIO
DUBBING	+8			REC/OTR
	4		SP SLP
	0
OK/STATUS	6		CHANNEL	PAUSE/STILL	PLAY
	-15dB	VCR
L	NORM
					TURBO
					DRIVE

2

Press the REC/OTR button to start recording the current channel. The S-VHS ET button has no effect once the recording has begun.

3

When recording is finished, press the S-VHS ET button again to cancel S-VHS ET recording.

Helpful Hints

•Pressing the S-VHS ET button has no effect on an S-VHS tape.

•To obtain the highest quality recording and to play pictures over a longer peri- od, S-VHS recording on S-VHS tape is recommended.

•Label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

•S-VHS ET recordings can be played on an S-VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAYBACK). However, there may be cases where S-VHS ET playback is not possible on a particular VCR.

•Frequent still, frame-by-frame, and slow motion playback may damage the tape and cause the picture quality to decline.

•With some tapes, better picture quality may not be obtained even with S-VHS ET recording. Test a recording first to make sure better results can be obtained.

•Use high grade tapes for good results.