Philips VR810BPH owner manual Quick Programming, Channels are programmed. Details are on pages

40 Quick Programming

Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically.

Before you begin, make sure:

•Channels are programmed. Details are on pages 12-13.

•The clock is set. Details are on pages 14-18.If the clock is not set, CLOCK MUST BE SET appears on the screen, followed by the main VCR menu.

•There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

•The VCR is in VCR position. The VCR light will appear on the dis- play panel when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.

•When you use a Cable Box/DBS, timer recordings are pro- grammed differently. Read pages 8-9 before proceeding.

Complete each step within 60 seconds of the previous step.

1

Press the VCR button, then press the TIMER button.

➔VCR PLUS+

QUICK PROGRAMMING PROGRAM REVIEW

SELECT: ,9	CONFIRM: OK
END: TIMER

2

Press the PLAY 8 or STOP 9 button to select QUICK

PROGRAMMING, then press the OK/STATUS button.

ONE TIME PROGRAM
PROGRAM	1
CHANNEL +/– – – –
START +/–	– – : – –	AM
STOP +/–	– – : – –	AM
REC SPEED	SLP
DATE +/–	– – /– – /– –
DAILY: 8		WEEKLY: 9
CONFIRM: OK		END: TIMER

3

Press the CH(annel) 8/9 button to enter the channel you want to record.

•If you are using a standard antenna/cable to VCR to TV hookup (as shown on pages 6-7), enter the channel of the TV program you want to record.

•If you are using a Cable Box/DBS and are not using the Controller, enter the Cable Box/DBS output channel. Set the Cable Box/DBS to the channel you want to record. Leave the Cable Box/DBS on for a timer recording.

•If you are using the Controller, enter the channel number that you want to record. The Controller will select the channel at the Cable Box/DBS.

ONE TIME PROGRAM
PROGRAM	1
CHANNEL +/–	12
START +/–	– – : – –	AM
STOP +/–	– – : – –	AM
REC SPEED	SLP
DATE +/–	– – /– – /– –
DAILY: 8		WEEKLY: 9
CONFIRM: OK		END: TIMER

							1
SAT/
CBL/DBS			TV			VCR
VCR/TV			POWER		SMARTPICTURE
	QUICK PROGRAMMING
1— +* + 2 ABC + 3 DEF
START			STOP			DATE
4 GHI - 5 JKL - 6 MNO
VPS/PDC			DAILY			WEEKLY
7PQRS			8 TUV			9WXYZ
SPEED			DBS/SAT
ALT			0			CLEAR
			STILL/SLOW
-	..........				..........		+
REW							FF
			PLAY				2
			STOP
VOL			OK/STATUS				CH
			MENU				3
			TIMER
TURBO		AUDIO/		SKIP			TAPE

TIMER MUTE SEARCH MANAGER

Helpful Hint

•If you are using a DBS and have set up the Controller, CABLE/TV or DBS may appear beside the channel num- ber. You may need to clarify whether the desired channel is for Cable TV or Satellite TV (DBS). If so, “CABLE/TV OR DBS: 0” will appear near the bot- tom of the screen. Press the Number 0 (DBS) button repeatedly to select either CABLE/TV or DBS.

Select DBS only if you have connected a DBS to the VCR. For all other con- nections, select CABLE/TV.