Philips VR810BPH One-Touch Recording, Starting an OTR, Channels are set up. Details are on pages

34 One-Touch Recording

The One-Touch Recording (OTR) function allows you to start an immediate timed recording 30 minutes to six hours long of the channel you are watching. Before you begin, make sure:

•Channels are set up. Details are on pages 12-13.

•The desired recording speed (SP or SLP) has been selected with the ALT/SPEED button. Details are on pages 25, 41 and 77.

•There is a tape in the VCR. Make sure the tape’s record tab is intact (see page 5) and the tape is long enough to record the program(s). If the end of the tape is reached during an OTR, recording will stop. The VCR will eject the tape and turn itself off.

•The VCR is in VCR position. (The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.)

Starting an OTR

1

Press the VCR button.

2

Use the CH(annel) 8/9 button or the Number buttons to select the channel you want to record.

SAT/			1
CBL/DBS	TV	VCR
VCR/TV	POWER	SMARTPICTURE

QUICK PROGRAMMING

	1— +* + 2 ABC + 3 DEF
	START		STOP		DATE
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC		DAILY		WEEKLY
	7PQRS		8 TUV		9WXYZ
	SPEED		DBS/SAT
	ALT		0		CLEAR
		STILL/SLOW
	-	..........		..........		+
	REW					FF
			PLAY
4			STOP
	VOL	OK/STATUS				CH
			MENU			2
			TIMER
	TURBO	AUDIO/		SKIP		TAPE

3

Press the REC(ord)/OTR button repeatedly until the desired recording length appears briefly on the screen and on the display panel. The \ light will flash on the display panel. (The recording length will not appear on the screen if ON SCREEN MODE is set to OFF.)

OTR (0:30)

CH. 12

TIMER MUTE SEARCH MANAGER

JOG/SHTL	REC /OTR	3
REV	FWD

SLP

4

To stop an OTR before recording is finished, press the STOP 9 button.

To cancel the OTR but continue recording, press the REC(ord)/OTR button repeatedly until REC appears in the upper left corner of the TV screen. (ON SCREEN MODE cannot be set to OFF. Details are on page 28.) The \ light will remain on the dis- play panel.

Helpful Hints

•To check the time remaining for an OTR after the OTR is in progress, press the OK/STATUS button. The remaining time will appear beside OTR on the screen. (ON SCREEN MODE can not be set to OFF.)

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on the VCR display panel. The desired length also will appear on the screen if ON SCREEN MODE is set to ON or

COUNTER.

•If the preset time for a timer record- ing comes up during an OTR, the OTR has priority.