SWITCHING THE MODULATOR ON / OFF ENGLISH
46
46

SSwwiittcchhiinngg tthhee mmoodduullaattoorr oonn // ooffff

If picture and sound interference cannot be removed by optimising the
modulator,the integral modulator can be switched off. Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator swit-
ched off without a scart cable.
FFOORR
EEXXPPEERRTTSS
6Confirm the new modulator frequency with
OOKK. In the display there will briefly
appear OK.The screen will show STORED
SSwwiittcchhiinngg ooffff tthhee mmoodduullaattoorr
If you have connected the video recorder to the TV
set with a scart cable, you can switch off the
modulator when there is interference with the
picture or sound (see below).
1Switch the video recorder on and make sure
there is no cassette in the video recorder
3The video recorder will now transmit a test
image on this frequency
2Press simultaneously the SSTTOOPPbutton hon
the remote control and the
SSTTOOPP//EEJJEECCTT ??button on the front of
the video recorder until the modulator
frequency of the set appears in the display
(e.g.:M583 for 583 MHz)
4Use ==PP--or ;;PP++to select the option
MODULATOR
6Confirm with OOKK. In the display there will
briefly appear OK.The screen will show the
message STORED
5Use PP or QQto select the setting ON
(Modulator on) or OFF (Modulator off)
M583
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY
Q583P
MODULATOR ON
EXITPMENU STOREPOK
?