Channel Memory, Programming Channels | Philips VRX342AT specification

12 Channel Memory

Programming Channels

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you reprogram channels.

1

Press the VCR button.

2

Press the MENU button to bring up the main menu display.

TO SELECT PUSH NO. SHOWN

1PROGRAM

2VCR SET UP

3TUNER SET UP

4SET CLOCK

TO END PUSH EXIT

3

Press the Number 3 button to select TUNER SET UP.

TO SELECT PUSH NO. SHOWN

1	TV
2	CABLE TV	ON

3AUTO PROGRAMMING

4ADD/DELETE CH

5CH MEMORY REVIEW

TO END PUSH EXIT

4

Press the Number 1 button to select TV (if you have an antenna) or the Number 2 button to select CABLE TV (if you have a cable connection). ON will appear to the right of your choice.

5

Press the Number 3 button to select AUTO PROGRAM- MING. MEMORIZED CHANNEL / PLEASE WAIT will appear on- screen. The VCR will place all the channels you receive into its memory.

6

Wait for a few minutes while the VCR programs chan- nels. When programming is complete, CHANNELS ARE SET will appear on-screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on-screen. Now when you press the CHANNEL (Up/Down) buttons, you will scan only through channels you receive.

1 3&5

4			VCR	TV	CABLE
	POWER		VCR	TV	/DSS
	POWER				/DSS
			2	3	VCR/TV
	1		2	3
	4		5	6
					CHANNEL
	7		8	9
VCR PLUS+
	/ENTER
			0	+100
	SPEED	TIME SEARCH		MUTE	VOLUME
			PLAY
–	REW				F.FWD +
			STOP
2	REC/OTR		MEMORY	SLOW	PAUSE/STILL
2	MENU		STATUS/EXIT	CLEAR	EJECT

Helpful Hints

•You can not enter the TUNER SET UP menu when you are in Line Input mode.

•Line Input mode will always be stored in the VCR’s memory as channel 001 or 002. When you select channel 001 or 002 with the CHANNEL (Up/Down) buttons or the Number buttons, AV REAR or AV FRONT will appear on the screen briefly.

•You may not be able to program channels if you are using a Cable Box. See pages eight-nine for details.

•To switch between TV and CABLE TV selection, repeat the steps on this page.

Image 12

Philips VRX342AT warranty Channel Memory, Programming Channels, Press the VCR button

Contents

VRX342AT Dear Philips Magnavox product owner For Customer Use Features Safety PrecautionsIntroduction Use Table of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Remove the battery compartment lid on the bottom Hookups Without a Cable Box Disconnect the antenna or cable from your TV Hookups Without a Cable Box cont’d Plug in the TV and the VCR Timer Recordings Hookups With a Cable BoxRecording/Viewing Any Channel Watching TV With the VCR Off Hookups With a Cable Box cont’d Recording One Channel/Watching AnotherPlaying a Tape Press the Play button to play the tape Hookups With a Stereo TV Turning on Your VCR 1Turn on the TV Press the Number 3 button to select Tuner SET UP Channel MemoryProgramming Channels Press the VCR button Adding/Deleting Channels Reviewing Programmed ChannelsUse the Number buttons to enter the channel number Setting the Clock Manual Clock SettingPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual Clock Setting the Clock cont’d Setting the Clock cont’d Automatic Clock SettingPress the VCR button, then press the Menu button to Bring up the main menu display Time Zone Press the Number 4 button to select SET Time Zone Daylight-Saving Time Selection Daylight-Saving Time Selection Press the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 3 button to select Language TV Code Setting Press and release the Mute buttonWithin 30 seconds after releasing the Mute button, press Release the TV button Find the brand of your Cable Box or Satellite System on Release the CABLE/DSS buttonWithin 30 seconds after releasing the CABLE/DSS button, use Remote Control Buttons Remote Control Buttons cont’d Press the Number 2 button to select on Screen Mode On-Screen Status DisplaysTo choose the status display mode, follow the steps below VCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tape Press the VCR button on the remote control Recording Recording One Channel/Watching Another Press the Stop button to stop the recording Channels are programmed With the Tape Speed buttonIntact and the tape is long enough to record the programs Buttons to select the channel you want to record Timer Recording DailyRecording Menu Screen Timer Recording cont’d Enter the recording’s stop time Timer Recording cont’d Press the STATUS/EXIT button. Program WAS COMTape Speeds Checking or Cancelling Timer Recordings See page 46 for more hints Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Press the VCR button, then press the Menu button Press the Number 4 button to select VCR PLUS+ REF. MAP Panel of the VCR. If it does not, press the VCR/TV button Once Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat Playback Time Search Time Search Real Time Counter Memory Real Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel Channel 3 or Specifications Renewed Index Supplied Accessories