20 TV Code Setting
Your VCR remote control may operate your TV. If the remote control doesn’t operate your TV now, follow the steps below to program your remote control.
1
1&6
2Find your TV code.
Point the remote control at your TV and press the TV button. Then, press the POWER button. If your TV comes on, try the other TV buttons (see pages 22 - 23). If your TV doesn’t come on, or if the other buttons don’t work, go to step 2.
2
| VCR | TV | CABLE | |
POWER | /DSS | |||
|
|
| 2 | 3 | VCR/TV | 4 |
1 |
|
| ||
4 | 5 | 6 |
|
|
|
|
| CHANNEL |
|
Find the brand of your TV on the list below, and remem- ber the
TV CODES
MAGNAVOX . . . . | .01, 02, 03 | . . . .07 | |
PHILIPS | . . . . . . .01 | PHILCO | . . . .14 |
7 8 9
VCR PLUS+ |
|
|
/ENTER |
|
|
| 0 | +100 |
SPEED | TIME SEARCH | MUTE |
PLAY
–REW
VOLUME
F.FWD +
5
3
EMERSON | .14 | QUASAR | . . .07 |
FISHER | .11 | RCA | . . .10 |
GE | .10 | SAMSUNG | . . .17 |
GOLDSTAR | .04 | SANYO | . . .11 |
HITACHI | .12 | SEARS | 08, 11 |
JVC | .05 | SHARP | . . .16 |
MARANTZ | .13 | SONY | . . .09 |
MITSUBISHI | .13 | TOSHIBA | . . .08 |
MONTGOMERY WARD . | .14 | ZENITH | 06, 15 |
PANASONIC | .07 |
|
|
3
Press and release the MUTE button.
STOP
REC/OTR | MEMORY | SLOW | PAUSE/STILL |
MENU | STATUS/EXIT | CLEAR | EJECT |
4
Within 30 seconds after releasing the MUTE button, press and
release the TV button.
5
Within 30 seconds after releasing the TV button, use the
Number buttons to enter the
6
Try step 1 again. If the remote control works your TV, you’re finished. If the remote control still doesn’t work your TV, repeat steps 2 - 5, using another code.
There is no guarantee that the
remote will work your TV.
Helpful Hints
•Although the remote control that comes with your VCR will work most Magnavox TVs, as well as many TVs sold under other brand names, it is possible that the remote control will not operate your TV.
•The remote control may only operate some features of your TV. For exam- ple, the remote control may turn on the TV power, but it may not change channels at the TV.
•If you had to program the remote control to operate your TV here, whenever you replace the batteries in the remote control, you will have to program the remote control again.
