Rerecording Tape Duplication | Philips VRX342AT manual

40 Rerecording (Tape Duplication)

1. Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2

VCR 1 - Playing VCR

VCR 2 - Recording VCR

			ANT				ANT
			IN				IN
AUDIO				AUDIO
OUT	IN		OUT	OUT	IN		OUT
VIDEO		CH3	CH4	VIDEO		CH3	CH4
VIDEO				VIDEO

2. Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2

The instructions on this page show you how to copy tapes. The illustration uses two VCRs just like yours. Different VCRs may operate differently.

NOTE: Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

3.RF coaxial cable (supplied) from

VCR’s OUT Jack to TV’s ANTENNA IN Jack

1

Make the connections shown above.

2

VCR 1 will play your tape. Insert a prerecorded tape in VCR

1.If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. Make sure the VCR 2 power is on and VCR 2 is in VCR position. (The VCR light will appear on the display panel. If it does not, press the TV/VCR button once.)

4

Turn the TV on and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press Number but- tons 0, 0, 1 or 0, 0, 2.

6

Point the remote control at VCR 2. Use the (Tape) SPEED button to select SP, LP or SLP.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

•If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1. AV REAR will appear on-screen.

•If you use the AUDIO and VIDEO IN Jacks on the front of VCR 2, press Number buttons 0, 0, 2. AV FRONT will appear on-screen.

Image 40

Philips VRX342AT warranty Rerecording Tape Duplication

Contents

VRX342AT Dear Philips Magnavox product owner For Customer Use Features Safety PrecautionsIntroduction Use Table of Contents Putting Batteries in the Remote Control Using the Remote ControlVCR maintenance Remove the battery compartment lid on the bottom Hookups Without a Cable Box Disconnect the antenna or cable from your TV Hookups Without a Cable Box cont’d Plug in the TV and the VCR Timer Recordings Hookups With a Cable BoxRecording/Viewing Any Channel Watching TV With the VCR Off Hookups With a Cable Box cont’d Recording One Channel/Watching AnotherPlaying a Tape Press the Play button to play the tape Hookups With a Stereo TV Turning on Your VCR 1Turn on the TV Press the Number 3 button to select Tuner SET UP Channel MemoryProgramming Channels Press the VCR button Reviewing Programmed Channels Adding/Deleting ChannelsUse the Number buttons to enter the channel number Setting the Clock Manual Clock SettingPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual Clock Setting the Clock cont’d Setting the Clock cont’d Automatic Clock SettingPress the VCR button, then press the Menu button to Bring up the main menu display Time Zone Press the Number 4 button to select SET Time Zone Daylight-Saving Time Selection Daylight-Saving Time Selection Press the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 3 button to select Language TV Code Setting Press and release the Mute buttonWithin 30 seconds after releasing the Mute button, press Release the TV button Release the CABLE/DSS button Find the brand of your Cable Box or Satellite System onWithin 30 seconds after releasing the CABLE/DSS button, use Remote Control Buttons Remote Control Buttons cont’d On-Screen Status Displays Press the Number 2 button to select on Screen ModeTo choose the status display mode, follow the steps below VCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tape Press the VCR button on the remote control Recording Recording One Channel/Watching Another Press the Stop button to stop the recording Channels are programmed With the Tape Speed buttonIntact and the tape is long enough to record the programs Buttons to select the channel you want to record Timer Recording DailyRecording Menu Screen Timer Recording cont’d Enter the recording’s stop time Press the STATUS/EXIT button. Program WAS COM Timer Recording cont’dTape Speeds Checking or Cancelling Timer Recordings See page 46 for more hints TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Press the VCR button, then press the Menu button Press the Number 4 button to select VCR PLUS+ REF. MAP Panel of the VCR. If it does not, press the VCR/TV button Once Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat Playback Time Search Time Search Real Time Counter Memory Real Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel Channel 3 or Specifications Renewed Index Supplied Accessories