Setting the Remote to Operate a Cable Box/Digital Satellite System 21
Your VCR remote control may operate your Cable Box or Digital Satellite System. If the remote control doesn’t operate your Cable Box or Satellite System now, follow the steps below to program your remote control.
1
Point the remote control at your Cable Box or Satellite System and press the CBL/DSS button. Then, press the POWER but- ton. If your Cable Box or Satellite System turns on or off, try the other Cable Box/Satellite System buttons (see pages 23 - 25). If your Cable Box or Satellite System doesn’t turn on or off, or if the other buttons don’t work, go to step 2.
2
Find the brand of your Cable Box or Satellite System on the list below, and remember the
CABLE BOX CODES
HAMLIN . . . . | . . . . .21, 22 | PIONEER . . . . | . . . .11, 12 | |
JERROLD . . | . .01, 02, 03, | SCIENTIFIC |
| |
. . . . . . . . .04, 05, 06, 07 | ATLANTA . . . . | .08, 09, 10 | ||
OAK | . .16, 17, | 18 | TOCOM | .23, 24, 25 |
PANASONIC | . . . . .19, | 20 | ZENITH | .13, 14, 15 |
SATELLITE SYSTEM CODES
MAGNAVOX . . . . .26, 27 | RCA | .28 |
3
Press and release the MUTE button.
4
Within 30 seconds after releasing the MUTE button, press and release the CBL/DSS button.
5
Within 30 seconds after releasing the CBL/DSS button, use the
Number buttons to enter the
6
Try step 1 again. If the remote control works your Cable Box or Satellite System, you’re finished. If the remote control still doesn’t work your Cable Box or Satellite System, repeat steps 2 - 5, using a different code.
There is no guarantee that the remote control will work your Cable Box or Satellite System.
| Find your Cable Box/Satellite | ||||
2System code. |
|
| |||
4 | CBL/DSS | VCR | TV | 1 | |
PAUSE | POWER | VCR PLUS+ | |||
/STILL |
|
| /ENTER | ||
| SLOW |
|
| F.ADV | & |
| V |
|
| C | 6 |
| STATUS/EXIT |
| CLEAR |
| |
|
| MENU |
|
| |
|
| VOL | CH |
|
|
| V |
|
| C |
|
| 1 |
| 2 | 3 | 5 |
| 4 |
| 5 | 6 | |
| 7 |
| 8 | 9 | |
| 100 |
| 0 | A.CH | |
| REC/OTR | INDEX | SKIP |
|
|
| SEARCH | SEARCH | VCR/TV |
| |
| SPEED | MEMORY |
|
| |
3 | EJECT | X2 PLAY | VAR.SLOW TRACKING |
| |
MUTE |
| TIME SEARCH REC END SEARCH |
| ||
JOG & SHUTTLE
Helpful Hints
•Although the remote control that comes with your VCR will work most Cable Boxes and Satellite Systems, it is possible that the remote control will not operate your Cable Box or Satellite System.
•The remote control may only operate some features of your Cable Box or Satellite System. For example, some Cable Boxes may only be turned on at the Cable Box, therefore the remote control will not be able to turn on the Cable Box.
•If you can not change the channels at the Cable Box by using the Number buttons, press the VCR PLUS+/ENTER button after you press the Number buttons. It may change channels at the Cable Box.
•If you had to program the remote control to operate your Cable Box or Satellite System here, whenever you replace the batteries in the remote control, you will have to program the remote control again.
