Hookups With a Cable Box/DSS Receiver (cont’d) 9

Hookups With a Cable Box/DSS Receiver (cont’d) 9

This connection allows you to program an unattended recording of more than one unscram- bled channel and to watch one channel while recording another. After you connect the VCR, Cable Box/DSS Receiver, and TV as shown below, the features on this page will be available.

1.Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

AUDIO

ANT

IN

 

L

 

 

R

 

VIDEO

OUT

OUT

IN CH3

CH4

2.Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DSS Receiver.

TV ANTENNA IN Jack

3.Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DSS Receiver to the ANTENNA IN Jack on the back of the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DSS Receiver on the same channel as the VCR’s CH3/CH4 switch. Put the TV on the same channel. With the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) Up/Down buttons at the VCR to select the channel you want to record. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)

3

Use the TV channel selector to put the TV on the Cable

Box/DSS Receiver output channel (channel 03 or 04).

4

Select the channel you want to watch at the Cable Box/DSS Receiver.

Playing a Tape

1

Press the VCR/TV button to put the VCR in VCR position (the VCR light will appear on the display panel).

2

Make sure the Cable Box/DSS Receiver is on the same channel as the VCR’s CH3/CH4 switch.

3

Use the TV channel selector to put the TV on the same chan- nel.

4

Helpful Hint

You cannot record scrambled chan- nels with this connection.

Press the PLAY button to play the tape.

Page 9
Image 9
Philips VRX562AT Hookups With a Cable Box/DSS Receiver cont’d, Recording One Channel/Watching Another, Playing a Tape