Philips VRX562AT warranty Automatic Operation Features cont’d, Automatic Tracking Adjustment

Models: VRX562AT

1 64
Download 64 pages 60.3 Kb
Page 53
Image 53
Automatic Operation Features (cont’d) 53

Automatic Operation Features (cont’d) 53

Automatic Tracking Adjustment

The VCR continually adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To adjust the tracking manually, press the TRACKING (Up/Down) buttons on the remote control.

NOTES:

The CHANNEL (Up/Down) buttons on the VCR adjust tracking dur- ing playback. This function is controlled only by the CHANNEL (Up/Down) buttons on the VCR. The CH(annel) Up/Down buttons on the remote control will not adjust tracking.

To return tracking to the position it was in when the VCR was shipped from the factory, press the CHANNEL (Up) and CHANNEL (Down) buttons on the VCR at the same time.

Tracking is returned to auto tracking when a tape is inserted, or when the STOP button is pressed to halt playback.

When the VCR is in Slow mode, auto tracking will not work. Instead, use the TRACKING (Up/Down) buttons on the remote control or the CHANNEL Up/Down buttons on the VCR to reduce noise lines in slow motion playback.

Manual tracking will not operate when the VCR is in Still mode. If you want to reduce noise lines in a still picture, place the VCR in Slow mode. Use the TRACKING (Up/Down) buttons on the remote con- trol or the CHANNEL Up/Down buttons on the VCR to remove the noise lines. Then return to Still mode.

Before

After

Tracking

Tracking

Adjustment

Adjustment

Page 53
Image 53
Philips VRX562AT warranty Automatic Operation Features cont’d, Automatic Tracking Adjustment, Manual Tracking