Philips VRX562AT warranty Hi-Fi Stereo Sound System, Helpful Hints

56 Hi-Fi Stereo Sound System

Multi-Channel Television Sound System broadcasts are automati- cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes recorded in Hi-Fi stereo, however, you’ll need to follow the steps below.

1

Press the VCR button, then press the MENU button.

2

Press the Number 2 button to select VCR SET UP.

TO SELECT PUSH NO. SHOWN

1 REPEAT PLAY OFF

2ON SCREEN MODE

3AUDIO OUT

4LANGUAGE

5VCR PLUS+ REF. MAP

TO END PUSH EXIT

3

Press the Number 3 button to select AUDIO OUT.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

4

Press the Number 1 button to select HIFI. ON will appear to the right of HIFI on-screen.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

5

Press the STATUS/EXIT button to exit.

	CBL/DSS		VCR	TV	1
	PAUSE	POWER		VCR PLUS+
	/STILL			/ENTER
5	SLOW			F.ADV
	STATUS/EXIT			CLEAR	2
		MENU
	V	VOL	CH	C
	V			C	3
4	4		5	6
	1		2	3
	7		8	9
	100		0	A.CH
	REC/OTR	INDEX	SKIP
		SEARCH	SEARCH	VCR/TV
	SPEED	MEMORY
	EJECT	X2 PLAY	VAR.SLOW	TRACKING
	MUTE		TIME SEARCH REC END SEARCH
				JOG & SHUTTLE

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1 - 3 above. At step 4, press the Number 2 button to select MONO. Press the STATUS/EXIT button to exit. HIFI will disappear from the status display.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disap- pear from the status display and the tape will play in monaural sound.

Additional hints are on page 59.