Timer Recording (cont’d) 37
Checking or Cancelling Timer Recordings
1
With the VCR on and in VCR position (the VCR light will appear on the display panel), press the VCR button, then press the
MENU button.
2
Press the Number 1 button to select PROGRAM.
3
Press the Number 4 button to select PROGRAM REVIEW. The timer recording information for the program in the lowest numbered slot will appear
4
Press the Number 1 button repeatedly to review all pro- grammed timer recordings. If you don’t press the Number 1 but- ton in 10 seconds, the VCR will automatically display information about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.
5
To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
6
Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording.
CBL/DSS | VCR | TV |
| PAUSE | POWER | VCR PLUS+ | 5 | |
|
|
| /ENTER |
| |
| /STILL |
|
|
| |
|
|
|
|
| |
1 | SLOW |
|
| F.ADV |
|
STATUS/EXIT |
| CLEAR | 2 | ||
| MENU |
| |||
V |
|
| C | ||
V | VOL | CH | C | ||
3 | 1 |
| 2 | 3 | & |
4 |
| 5 | 6 | ||
7 |
| 8 | 9 | 4 | |
| 100 |
| 0 | A.CH | |
| REC/OTR | INDEX | SKIP |
| |
| SEARCH | SEARCH | VCR/TV | ||
| SPEED | MEMORY |
|
|
|
| EJECT | X2 PLAY | VAR.SLOW | TRACKING |
|
| MUTE |
| TIME SEARCH REC END SEARCH |
| |
JOG & SHUTTLE
Helpful Hints
•CLASH may flash on the screen when you finish setting a timer recording. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out. In this case, cancel the overlap- ping timer recording.
•If the preset time for a timer recording comes up during an OTR, the OTR has priority.
•To stop a started timer recording, press the STOP/EJECT button on the VCR.
•If the power fails for more than one hour, programmed timer recordings will be lost. If this occurs, reset the
clock before re-programming the timer recording(s).
See page 58 for more hints.
