Managing LiveGateway from the LiveManager Gatekeeper
Overview
This chapter describes how to view and manage LiveGateways remotely by using the LiveGateway SNMP
Manager feature from within the LiveManager application. To use this feature, SNMP service for each
LiveGateway must be enabled. Normally, SNMP service for a LiveGateway is enabled from the LiveGateway
Configuration window when that LiveGateway is installed on your system.
When SNMP service is enabled, you can:
Monitor the status of LiveGateway and determine its current activities.
Configure the ISDN BRI when you need to change WAN switch information.
Locate and resolve LiveGateway problems.
Note This section assumes you have access to the LiveManager gatekeeper. For more information on
LiveManager, refer to the PictureTel LiveManager Product Guide.
The information in this section is organized into the following categories:
SNMP Service
Using the LiveGateway SNMP Manager
Saving the Window Layout & Position
Configuring the LiveGateway SNMP Manager
Adding LiveGateway Servers
Changing Server Information
Deleting Servers
Opening a LiveGateway Server
The LiveGateway Server Window
Working with the LiveGateway Server Window
Monitoring LiveGateway Status
Configuring the ISDN BRI
Setting On Line Status
Setting Off Line Status
Performing a Self Test
Testing and Resetting the Board
Performing a Loop Back Test
Viewing a POST Result
Viewing LiveGateway Board Statistics
Viewing Board Settings & Version Information