Using the Menu bar The menu bar for the LiveGateway Server window lists the following selections:
Menu Bar
Selection Description
File
1. Choose "Save Window Layout" to save the window size, current tab
selection, and column widths.
2. Choose "Close" to close the LiveGateway Server window.
Note: File menu bar options are the same for both tabs.
View
1. Choose "Refresh" to read and refresh the data displayed in the window and
any other windows that were opened from this window.
Note: View menu bar options are the same for both tabs.
Operations
For the Gateway Boards tab:
1. Choose "On Line." to place the LiveGateway board on line.
2. Choose "Off Line..." to place the LiveGateway board off line.
3. Choose "Self Test" to perform a Power On Self Test of the LiveGateway
board.
4. Choose "Configure..." to reconfigure your ISDN BRI. Normally the ISDN
BRI is configured once when LiveGateway is installed. However, if your
ISDN switch is changed, you can reconfigure the ISDN BRI from the
LiveGateway Server window.
5. Choose "Loop Back..." to perform a Loop Back test on the LiveGateway
board.
6. Choose Show POST Result..." to show the POST (Power On Self Test)
result for the LiveGateway board.
7. Choose "Show Statistics..." to display statistics for the LiveGateway board.
Selections that appear "dimmed (grey)" aren't available. For example, if the
LiveGateway board is currently "on line", the "On Line" selection will appear
dimmed since it is already selected.
For the Settings tab:
1. Choose "Save Changes" to save any changes that you made to the
Gatekeeper name or address.
Help
For the Gateway Boards tab:
1. Choose "Help" to display the online help for the Gateway Boards tab.
For the Settings tab: