SNMP Service
To manage a LiveGateway server from the LiveGateway SNMP Manager, the SNMP (Simple Network
Management Protocol) service of the LiveGateway must be enabled.
If you checked the SNMP enabled check box on the LiveGateway Configuration screen when you installed
LiveGateway, SNMP service is available. Refer to Chapter 4, Managing LiveGateway through the
LiveManager Console, in the PictureTel LiveGateway Installation Guide for more information.
Using the LiveGateway SNMP Manager
You will use the LiveGateway SNMP Manager to perform the following tasks:
Configure the default polling and data refresh intervals used by the SNMP Manager
Configure the default SNMP parameters used for accessing the LiveGateway servers
Add new LiveGateway servers
Change LiveGateway server information
Delete LiveGateway servers
Open the LiveGateway server you want to work with.

The LiveGateway SNMP Manager Window

The LiveGateway SNMP Manager window is shown in the following illustration.
The menu bar for this window lists the following selections:
Menu Bar
Selection Description
File
1. Choose "Configure..." to configure the polling intervals and data refresh intervals, and
set the default SNMP parameters for your LiveGateway servers.
2. Choose "Save Window Layout & Position" to save the window size, position and
column width.