CLD-V2600 / 2400 Level I & III • Chapter Three

CU-V113 / RU-V103 Remote Control:

LEVEL I CONTROL

REJECT: Ceases playback and spins-down the disc.

PAUSE: Ceases playback and displays a squelch screen. Press any motion button to resume.

PLAY: Begins playing a disc, or resumes play.

REPEAT MODE: This button can be pressed to set side repeat, chapter or track repeat, or auto-return.

STILL / STEP (FWD / REVERSE): Press either of these buttons to produce a still video image (CAV Only). Additional presses of the STEP FWD button moves the image forward one frame at a time. STEP REV moves the image in reverse one frame at a time.

DISP: Displays or removes the display of current chapter/frame/track or time numbers on the screen. During CD playback, track numbers with the disc’s absolute time location are displayed or track and index numbers are displayed with the elapsed time of the current track.

SCAN (FWD / REVERSE): Press either of these buttons to move quickly forward or backward through the program material on a disc. Rapid scanning continues as long as the button is depressed.

AUDIO: Press this button to select audio output: Digital Stereo, Digital 1/L, Digital 2/R, Audio OFF, Analog Stereo, Analog 1/L, Analog 2/R, Audio OFF. Note: CDs output digital audio only.

SPEED (DOWN / UP): Press these buttons to set the speed at which multi-speed play will occur. (CAV only.)

CLEAR: Press this button to CLEAR erroneous inputs or to stop a Search operation.

MULTI-SPEED (REV / FWD): Press this button to initiate Multi-Speed Play forward or reverse in the speed that has been set with the SPEED button. (CAV only.)

NUMERIC BUTTONS (0-9):Use these buttons to enter search points on a disc. Use the CHAP/FRAME TRACK/TIME button to set an “address flag”, indicating chapter, frame or time number (LD) or track or time number (CD) . Then enter the numeric digits for the location and press Search or Play. Digits 1-9 can also be used for viewer responses during Level III program execution. See Level III Command Input Number Wait (?N).

SEARCH: First set the “address flag” using the CHAP/ FRAME TRACK/TIME button. Then specify the number to be searched to by using the digit buttons. Press the

See Section 3.2.2, beginning on page 3-6, for details about the use of each specific remote control button.

REJECT

PAUSE

PLAY

REPEAT

STILL / STEP

 

 

MODE

REV

FWD

DISP

SCAN

 

REV

FWD

 

AUDIO

SPEED

 

DOWN

UP

 

CLEAR

MULTI

 

REV

FWD

 

7 8 9

4 5 6

1 2 3

CHAP/

0 SEARCHFRAME TRACK/

TIME

LaserDisc

VIDEO DISC PLAYER

REMOTE CONTROL UNIT CU-V113

Figure 3-C

SEARCH button to execute. After searching, the player presents a still frame on CAV discs or immediately plays on CLV discs or CDs.

CHAP / FRAME TRACK / TIME: Press this button to set the address flag, indicating how a search will be performed, either by chapter or frame number (CAV), or chapter or time number (CLV) or Track, Time (CD).

Note: The CU-V113 & RU-V103 remote control units are not packaged with a cable for connection to the BC Terminal on the front of the player. A stereo or mono mini-plug cable can be purchased separately, however, and used to provide the wired connection.

CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 • 12/93

3-5