Chapter Two • CLD-V2600 / 2400 Level I & III

Repeat Mode Status

When the REPEAT button is pressed on the remote control, the player displays three repeat options for LaserDiscs: Repeat Side, Repeat Chapter or Auto Return. Repeat options for CDs are Repeat Side, Repeat Track and Auto Return. All of the repeat options may be toggled through by pressing the REPEAT button several times. Repeat Mode Status is displayed in Area 2, the upper right corner of the monitor.

Repeat Side

The Repeat Mode status is displayed in Area 2, the upper right corner of the monitor. The CLV display, described on the next page, is also displayed in Area 2.

The Repeat button functions only during playback. Default at Power-On is Repeat Side.

Figure 2-Y

•When Repeat Side is selected, the player will play through the video material* to the end on a CAV or CLV LaserDisc, or through the audio material on a CD, and then the player will search to the beginning of the disc and play it again.

•Repeat Chapter is selected during CAV or CLV LaserDisc playback of a particular chapter. The player will play through the end of the chapter*, when

it reaches the chapter’s end, it will search to the beginning of the chapter and play it again. When Repeat Chapter or Repeat Track is selected, the player will repeat the selected chapter or track continuously until a Search command is sent to the player or until the Repeat Mode is changed. Powering off the player or sending an RS 232C command puts the player back into Repeat Side mode.

•Repeat Track is selected during CD playback of a particular track. The player will play through the end of the track and when it reaches the track’s end, it will search to the beginning of the track and play it again.

•When Auto Return is selected, the player will play through the video material* to the end of a CAV or CLV LaserDisc or through the audio material on a CD. When it reaches the end, the player will spin down the disc and enter Park Mode.

*If a picture stop is encountered during playback of a CAV disc, the player will stop and hold a still frame at that location until it receives the next motion command. Picture stops are often encoded on the first frame of a chapter but they also may be encoded at other locations. Picture stops cannot be encoded on CLV discs. Repeat Side and Repeat Chapter do not override picture stops.

2-18

TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual