Chapter Two • CLD-V2600 / 2400 Level I & III

2.5.2 Area 2: Status Displays for Audio, Speed Set, Repeat Mode & CLV Indicator

Audio commands are sent to the player by pressing the AUDIO button on the remote control unit. Speed Set commands are sent by pressing the remote control SPEED Buttons (Up or Down). Repeat Mode is set by pressing the REPEAT button. The Audio or Speed or Repeat Mode status of the player is displayed in Area 2, the upper right corner of the video monitor. See Figure 2-Q, on page 2-14.

Audio Status

Press the AUDIO button on the remote control unit to display the current audio output status on the two top display lines (display lines 0 and 1) in the upper right hand corner of the monitor. See Figure 2-Uand Figure 2-V,below.

 

 

 

 

 

 

 

Digital

Analog

 

 

 

 

Digital

 

 

 

 

 

 

 

 

 

 

 

* Digital Stereo

* Analog Stereo

 

 

Stereo

 

* 1/L

* 1/L

 

 

 

 

 

 

* 2/R

* 2/R

 

 

 

 

* Audio Off

*Audio Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 2-U

Figure 2-V

The first item, Digital or Analog, indicates whether audio output is to come from the analog or digital channels of the videodisc. Then, the following options are available: Stereo, 1/L, and 2/R and Audio Off. Digital, Analog and the options may be toggled through by pressing the AUDIO button repeatedly. Digital Stereo is the default setting, if digital audio is encoded on the disc.

NOTE: The Digital Sound indicator on the front of the CLD-V2400 player will be lit if the disc being played is encoded with digital audio. On the CLD-V2600 player, the words “Digital Sound” will be illuminated in the front panel display window.

2-16

TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual