LaserBarcodeStandard Commands & Logo (cont.)

Search Commands

Frame Search (CAV only)

Search to Frame 1000

Chapter Search (CAV & CLV)

Search to Chapter 2

Segment Play Commands

Frame Segment Play (CAV only)

Play from Frame 1000 to Frame 1200

Chapter Segment Play (CAV & CLV)

Play from Chapter 2 to Chapter 5

All of the sample LaserBarcodes included on page 1 & 2 of Appendix D were prepared using

Pioneer’s Bar’n’Coder for the Macintosh®.

The symbol below indicates that an application bearing it supports the standard LaserBarcode command set as established by the LaserBarcode Association. This symbol may be used only on applications that adhere to the original LaserBarcode standard command set. Customers look for this logo to

assure the application can be used with any player that is LaserBarcode compatible.

Standard LaserBarcodes may be created using Pioneer’s Barcode preparation software: The Bar’n’Coder for the Macintosh, Barkoder for Windows or LaserBarcode Tool Kit for IBM PC and MS DOS compatible computers.

Contact Pioneer New Media Technologies, Inc., Marketing Division at 310-952-2111 for information about licensing the LaserBarcode Logo.

LaserBarcodeis a trademark of Pioneer Electronic Corp.

Macintosh® is a registered trademark of Apple Corp.

D-2

TP 117 v. 2.0 • 12/93 Appendix D LaserBarcode & LB2 Commands & Logos