Chapter Three • CLD-V2600 / 2400 Level I & III

8) AUDIO

Function: Pressing this button sets the audio switches.

Explanation: The current audio setting is displayed when the audio button is pressed. Pressing this button repeatedly will change the audio status display as shown below. The audio switch data is written into the Audio Control Register.

A LaserDisc may be encoded with digital and analog audio or with only analog audio. The on-screen display shows the outputs that are available depending on the audio that is encoded on the disc that is playing. See Figure 3-E, Figure 3-F and Figure 3-Gbelow. NOTE: See Section 2.5.2 On Screen Display — Audio Status on page 2-16. CDs are encoded with only digital audio. See page 3-11.

LaserDisc encoded with both analog and digital audio:

Digital Stereo

Digital 1/L

Digital 2/R

Digital Audio OFF

Analog Stereo

Analog 1/L

Analog 2/R

Analog Audio OFF

Figure 3-E

LaserDisc encoded only with analog audio:

Analog Stereo

Analog 1/L

Analog 2/R

Analog Audio OFF

Figure 3-F

3-10

TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual