CLD-V2600 & CLD-V2400 Internal Player Controls

CLD-V2600 & CLD-V2400 Control Blocks

The following control blocks are used within the CLD-V2600 & CLD-V2400.

1.) Communication control block

2.) Player control block

1) Communication control block

The communication control block is divided into eleven units. It analyzes commands sent via various input methods, and executes the commands.

Front Panel Buttons

The CLD-V2600 player has POWER ON, OPEN/CLOSE, PLAY, PAUSE, SKIP FORWARD, SKIP REVERSE, DISIPLAY buttons and a SCAN FORWARD, SCAN REVERSE shuttle knob on the front panel. Section 3.1 Front Panel Control Buttons, page 3-1.

The CLD-V2400 player has POWER-ON, OPEN/CLOSE, PLAY, SKIP FORWARD, SKIP REVERSE, SCAN FORWARD, SCAN REVERSE buttons on the front panel. See Section 3.1 Front Panel Control Buttons, page 3-1.

Wireless Remote Control Unit

This is the remote sensor on the front panel. It converts the infrared Barcode or RCU code to an electric signal.

Wired Remote Control Unit

This is the Barcode terminal on the front panel. It receives the Barcode or RCU code via the stereo pin jack.

Head Phone Jack (CLD-V2600 only)

This is the jack for a headphone on the front panel. There is also a volume control.

Key Decoder

When a front panel button (key) is pressed, the key decoder generates data corresponding to the pressed button and sends it to the Key/RCU Command Processor.

RCU Decoder

When an RCU button (key) is pressed, the RCU decoder generates data corresponding to the pressed button and sends it to the Key/RCU Command Processor.

Key/RCU Command Processor

This command processor analyzes the front panel button /RCU command data received from the Key Decoder or the RCU Decoder, for execution.

RS-232C Command Processor

The RS-232C command processor analyzes RS-232C command data received from the RS-232C buffer for execution.

Appendix H CLD-V2600/2400 Internal Player Controls TP 117 v. 2.0 • 12/93

H-1