Pioneer CLD-V2400, CLD-V2600 4.3 Initial Settings, Status, Section, Register/Switch, Initial Setting, Register Control Commands, Section 2.4 Function Switch Settings

Chapter Four • CLD-V2600 / 2400 Level I & III

4.3 Initial Settings

The internal registers and switches are set to the following conditions when power is turned on. The settings are not re-initialized when the player is put into Park or Door Open Mode. Do not forget to set them to the parameters needed when creating an application program. Some of the switch settings can be set only via Register Commands under computer control; others can be set by using the DIP Switches on the rear panel of the player or via Registers. For more information see Section

4.7.6Register Control Commands, page 4-39, and Section 2.4 Function Switch Settings, page 2-13.

Register/Switch		Initial Setting	Status
	Key lock	0	Unlocked
	Video switch	1	ON
	Audio switch	7	Digital Stereo
			(If digital audio is
			encoded on the disc.)
	Display switch	0	OFF
	Address flag	3	Frame - CAV; Time - CLV
			Track - CD, CDV
	Speed parameter	60	Normal (X1) speed
	Communication
	Control	Mode 3	Automatic Status
	REG. A	3	Frame/Chapter - LD;
			Track/Time - CD, CDV
	REG. B	0	Normal squelch
	REG. C	1	Side Repeat ON and Blue
			Squelch. (Load Start, Power
			On Start and BAUD Rate can
			be set using SW 1 & 2 on the
			players’ back panel. Squelch
			color of Blue or Black can
			be selected with SW 3 on the
			back of the CLD-V2600).
			These options can also be set
			through Register C under
			Level III control.
	Figure 4-D

4-4 TP 117 v. 2.0 • 12/93 CLD-V2600 / 2400 Level I & III User’s Manual