CLD-V2600 / 2400 Level I & III • Chapter Two

CLV Display

When a CLV disc is playing, the player cannot perform certain CAV special effects commands such as STILL/STEP or MULTI-SPEED SET or MULTI-SPEED. If these buttons are pressed on the remote control unit during CLV play, the letters CLV will appear in Area 2, the upper right hand corner of the monitor, indicating that a CLV disc is playing and that certain commands (STILL/STEP FORWARD, MULTI- SPEED, etc.) are unavailable. The commands are also unavailable if a CD is playing, but no indicator will appear on the monitor.

2.5.3 Area 3: Argument Display

An “argument” displayed in Manual Mode is the numeric information preceding a search or play command that provides the player with the exact location (address) on the disc to search or play. It is displayed in the upper left corner of the video screen on the second display line (Line 1) after a search flag has been set by pressing the Chapter/Frame Track/Time button on the remote control, and after the numeric keys and then the SEARCH or PLAY button on the remote control are pressed (e.g. Frame Mode, 1000 SEARCH or Track Mode, 2 PLAY).

The numbers are displayed according to the type of address flag that has been set: Chapter, Frame, Track or Time. (See Figure 2-R - 2-T) The CLD-V2600 & the CLD-V2400 players search or play to frame numbers on a CAV disc; to chapter numbers on a CAV or CLV disc that has chapters encoded on the disc; to time numbers on a CLV disc; and to track, or time numbers on a CD. The default setting is Chapter Search on LDs and Track Search on CDs.

2.5.4 Area 3: Address Flag Display

The proper address flag must be set to send the correct “address” to the player. The address flag indicates the location to which the player will Search or Play. The Search address is displayed on the monitor according to the address flag that has been set. On the CU-V113 and the RU-V103, the button labeled CHAP/FRAME/TRACK/TIME is used to select the address flag (chapter, frame or time number for LaserDiscs, or track, or time for CDs). After the address flag is selected, send the location to which the player will search or play. (For more information, see Section 3.2.2, #12 Search on page 3-12 and #13 Chapter/Frame/Track/Time, on page 3-13.)

NOTE: The Chapter/Frame/Track or Time number address flag must be set before a Search or Play command is sent from a computer. Neither the address flag, nor the characters of an address will be displayed on the video screen during a computer transmitted Search or Play. See Section 4.5 on page 4-7 & 4-8 for more information on Level III Command Formats. For specific Level III Player Control Commands used to set the desired search flag, see Section 4.7 on page 4-21 to 4-23. Notice, it is possible to set address flags for Index and Block levels under computer control.

CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 • 12/93

2-19