Front image enhancer (F.I.E.)
TheF.I.E. (Front Image Enhancer) function is a
simplemethod of enhancing front imaging by
cuttingmid- and high-range frequency output
fromthe rear speakers, limiting their output to
low-rangefrequencies. You can select the fre-
quencyyou want to cut.
Precaution
Whenthe F.I.E. function is deactivated, the rear
speakersoutput sound of all frequencies, not just
basssounds. Reduce the volume before disenga-
gingF.I.E. to prevent a sudden increase in vo-
lume.
1 PressAUDIO to select FIE.
2 Pressato turn F.I.E. on.
#Toturn F.I.E.off, press b.
3 Presscor dto select a desired fre-
quency.
100160250(Hz)
Notes
!Afterturning the F.I.E. function on, use the bal-
anceadjustment (refer to page 21) and adjust
frontand rear speaker volume levels until they
arebalanced.
!Turnthe F.I.E.function off when using a 2-
speakersystem.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
!TheMW/LW tuner volume level can also be
adjustedwith source level adjustments.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
2 PressAUDIO to select SLA.
3 Pressaor bto adjust the source vo-
lume.
SLA+4 SLA 4is displayed as the source vo-
lumeis increased or decreased.
Audio Adjustments
En 23
English
Section
08