Pioneer DRM-3000 Read before use, Power supply unit DRM-PW701for DRM-7000, dischyper magazine

Read before use

Power supply unit [DRM-PW701] (for DRM-7000)

ADRM-PW701 add-on power supply unit must be installed in order to use 9 or more drives within the same changer. Always be sure to contact Pioneer service personnel for installation.

Power supply: Maximum of DC +5V, 12A Maximum of DC +12V, 8A

Malti drive connector panel [DRM-SN721]

The DRM-SN721 multi drive connector panel comes with a cable which may be used to connect two internal drives. The DRM-7000/DRM-3000 comes with a DRM-SN721 panel as a standard equipment, and this panel may be used to connect 2 or 4 additional drives in a daisy chain.

Single drive connector panel [DRM-SN711]

The DRM-SN711 single drive connector panel is used when a drive is to be connected directly to a host computer or when drives are to be daisy-chained outside of the changer unit.

Cable for 2 drives [DRM-SC721]

The DRM-SC721 2-drive SCSI cable is designed for internal daisy-chain connection to additional two drives. When used in combination with the DRM-SN721 multi drive connector panel, this cable makes it possible to connect up to 4 internal drives.

Cable for 4 drives [DRM-SC741]

The DRM- SC741 4-drive SCSI cable is designed for internal daisy-chain connection to additional four drives. When used in combination with the DRM-SN721 multi drive connector panel, this cable makes it possible to connect up to 6 internal drives.

ITEMS INCLUDED

20-disc hyper magazine ... 1

Changer/drive SCSI cable ... 1

Power cord (for Canada and the U.S.) ... 1

This type of power cord is for use in America and Canada only.

Do not use this power cord in places other than America or Canada.

Power cord (for Japan) ... 1

	This type of power cord is for use
	in Japan only.
	Do not use this power cord in a
	places other than Japan.
Base stabilizer
DRM-7000: 4	DRM-3000: 2

10

<DRC1184> En