12.Press the ESC key several times to return to user mode and close the rear access door.
Press the ESC key
≠
Press the ESC key
≠
Press the ESC key
≠
Press the ESC key
≠
Press the ESC key
≠
Close the rear access door
≠
Initialization complete
≠
As the remaining steps which must be performed may differ depending on the changer control software being used, please consult the manual for the changer control software being used for further instructions.
Operation
NOTE:
If you will replace drives without using the procedure described above, you must be more careful not to remove the wrong drive. In such a case, the installation procedure of the drive is the same as that described in “How to add a drive” (on p. 38), and note that the conditions under which the buzzer is sounded differ slightly.
English
43
<DRC1184> En
